Grab is the part where cranes carry goods. For different application fields, the types of grab used are also different. The common grab in our life is iron. In order to prevent the grab from rusting, paint is often used to smear the grab. Before using grab, one should have a general understanding of the grab specifications and quality used by oneself, so as not to fail in later use. Let's follow the grab manufacturer to see what grab usage requirements are.

1. Grab suitable for the goods grabbed is selected in use. The grab used is shown in the attached table "Main Technical Parameters Table of Grab". Grab with different numbers is used for materials with different bulk density. After receiving production tasks, the operation department should replace grab in time according to the requirements of the schedule.

2. When handing over and every half shift, the driver should check the grab once, and report the damage to the maintenance department for repair or replacement in time. No malfunction operation is allowed.

3. In use, the driver should obey the command of the central control and the designated personnel. It is strictly forbidden for the grab to strike the feeder plate and funnel of the hull and ship unloader.